Equipment & Software for Geophysical Surveys: Design, Manufacture, Support, Supply

We provide many options on delivery of our goods.
Please, contact us,
so we could choose together the best one for you!

Inclinometer probe INCLIS DH

Price :

on request


The product was successfully added to basket
Main features:
  • Allows to perform a 3D borehole deviation survey
  • 3 magnetometric and 3 accelerometric sensors
  • Optional set of aluminium rods (when iron casing is present)

The new inclinometer probe INCLIS DH, designed by SolGeo, allows to perform a 3D borehole deviation survey it is equipped with 3 magnetometric and an 3 accelerometric sensors. In case of iron casing which makes impossible the right working of the magnetometric sensors, the system is provided with a set of aluminium rod that allows to drive the probe inside the BH. INCLIS-DH is connected to the PC trough a USB Junction box which provides the power supply and the data transfer.

Dimensions 100 cm x 40 mm diameter
Weight 4 Kg
Operating temperature - 40 C to 125 C (-10 C to 125 C with recommended batteries)
Connectors Souriau 200 bar IP69
Shock limit 500 g
Enclosure material brass
Software Windows XP, Vista, 7
Digital output USB 2.0
ply voltage Direct from USB
Orientation range 360° about all axes (orientation angles); inclination, azimuth, GTF, MTF, Dip Angle
Accelerometer range 24 bits accelerometer; 16 bits magnetometer
Angle resolution 0.02°
Accuracy ± 0.2° inclination / ± 0.5° azimuth
Angle measurement repeatability 0.1°
Digital output rate/logging rate up to 8 Hz
Output modes acceleration and magnetic field vectors plus temperature; orientation angles plus temperature
Serial data rate 115200 baud
Datalogging capacity up to 32,768 data records
Supply current 50 mA typical when connected to host 16 mA typical when logging at 8Hz 500 μA typical when logging at 1/4 Hz 50 μA typical in deep sleep mode
Digital output RS-422 serial (four-wire full-duplex) standard
Supply voltage +6.0 VDC min, +10.0 VDC max