Equipment & Software for Geophysical Surveys: Design, Manufacture, Support, Supply

Geoelectrical multifunction receiver MEDUSA

Main features:
  • Direct current methods
  • Induced polarization
  • Frequency sounding
  • Stray currents
  • Self potentials
Standard set
Standard set Advanced set
Price: on request
+
The product was successfully added to basket

Recorder SGD-EEM MEDUSA is designed to measure values of the MN electric potential and AB current for slowly varying signals, as well as to measure the amplitude and phase characteristics of the harmonic components of the periodic signal.

Geoelectrical complex that consists of the recorder SGD-EEM MEDUSA and transmitter SGD-EGC SKAT IV and switchbox CommDD2 allows one to realize DC and IP imaging (ERT) surveys in automatic mode.

Recorders MEDUSA and MEDUSA-II are intended for geophysical studies with the variety of techniques such as:
  • Direct current methods - DC
  • Electrical resistivity tomography  - ERT
  • Induced polarization  - IP (both in time and frequency domains)
  • Frequency sounding - FS
  • Self potentials - SP
Recorder’s operation modes:
  • Test mode – control of input channels
  • Grounding resistance measurement
  • Current measurement in AB line
  • Zero offset compensation of the input signal
  • Measurements and storage of the survey data into the built – in memory 

The recorder is equipped with a precise built-in clock generator that provides the synchronization with a Transmitter.

The two-channel recorder MEDUSA – B2 (advanced version of MEDUSA) has two MN channels; built-in test generator, built-in battery; connectors RS422+1PPS for external GPS / GLONASS receivers; RS485 and RS232 switchbox connection sockets.  

Delivery set:
  • Recorder SGD-EEM MEDUSA
  • Power cable 220V (1,2 m)
  • High voltage connector for  MN and АВ lines (8 pc.)
  • USB cable (1,2 m)
  • Switchbox connector
  • Transmitter connector
  • Backpack harness
  • Battery 12 V, 8.5 А•h (2 pc.)
  • Battery charger and power supply 220V/50 Hz to  12V/2A.

Number of channels (MN and AB)

2

Operating frequencies

0, 0.019, 0.038, 0.076, 0.152, 0.305, 0.61, 1.22, 2.44, 4.88, 9.76, 19.5, 39.0, 78.1, 156.25, 312.5 и 625.0 Hz

Inherent noise level of MN channel (Ku=8, FΔ=0÷10Hz)

<1 µV

Input voltage range of MN channel

±10 V

Gain coefficient

1 and 8

Input impedance

> 60 MOhm

Accuracy

<1 %

ADC

23 bit + character

Maximum readings stored in memory

131072

Inbuilt clock and calendar

yes

Connection to PC interface

USB

External power supply source

10.5 ÷ 30 V

Maximum power consumption

5(8) W

Protection of electrical equipment

IP66

Operating temperature

-40 ÷ +70°С

Dimensions

210x110x70 mm

Weight of receiver

<1.2 kg

Weight of advanced set

<4.3 kg

Other
121 Kb
08.07.2020
196 Kb
21.10.2016
181 Kb
21.10.2016
15 Mb
21.10.2016