Equipment & Software for Geophysical Surveys: Design, Manufacture, Support, Supply

Search results

 
Found: 15

Hydrophone array WellStreamer

... starting from single channel and up to 48 units with typical separation of 1 m or 2 m. Mounted on a reel with a slip ring, which can be ordered with the streamer, it provides easy to operate data acquisition solution without spending time on unplugging equipment during cable operations. h-array Сhannels 1-24 Frequency range 1 - 10 000 Hz Capacity of piezoelectric element 4 000 pF Maximum pressure 60 at Breaking pressure 100 at Supply voltage 12-16 V Current consumption per channel 10±1 mA Output impedance of the preamplifier 395 Ohm Maximum value of the output signal ±3.8 V Operating temperature range -10 ÷ +70 °С Storage temperature range -40 ÷ +70 °С Diameter of the hydrophone module 42 mm ...

Overhauser gradiometer GradiMag

... processing: taking into account magnetic field variations, data filtering and analysis, coordinate gridding, plotting of magnetometry maps (total field, anomalies, gradient). The software allows quick processing of large amounts of data, obtained with various equipment using different observation techniques. Magnetometry survey forward modelling and data inversion may be successfully carried out with advanced ZondGM2d and ZondGM3d software packages. Operating range (each channel) 20 000 - 100 000 nT Absolute accuracy ≤2 ...

Overhauser magnetometer MiniMag

... processing: taking into account magnetic field variations, data filtering and analysis, coordinate gridding, plotting of magnetometry maps (total field, anomalies, gradient). The software allows quick processing of large amounts of data, obtained with various equipment using different observation techniques. Magnetometry survey forward modelling and data inversion may be successfully carried out with advanced ZondGM2d and ZondGM3d software packages. MiniMag Principle of operation based on Overhauser effect Range 20 000 ...

Cesium magnetometer QuantumMag

... processing: taking into account magnetic field variations, data filtering and analysis, coordinate gridding, plotting of magnetometry maps (total field, anomalies, gradient). The software allows quick processing of large amounts of data, obtained with various equipment using different observation techniques. Magnetometry survey forward modelling and data inversion may be successfully carried out with advanced ZondGM2d and ZondGM3d software packages.. QuantumMag Range 15 000 ÷ 110 000 nT Sensitivity 0.002 nT/√Hz Resolution ...

CommDD2 Switchbox

... receiver). It is also possible to work with other types of receivers due to the open-protocol management of the switchbox. commdd2 Current in AB line up to 2 A Maximum input voltage 400 V Operating temperatures -20 ÷ +50 °C Source voltage 12+2 V Current consumption at operation 100 mA (when backlit of the display is off) Number of switching electrodes 48/64/72/80 (might be extended up to 256) Connection to PC interface USB 2.0 Protection of electrical equipment IP-65 Overall dimensions 200x170x75 mm Weight of set 1.5 kg

Geoelectrical multifunction receiver MEDUSA

... frequencies 0, 0.019, 0.038, 0.076, 0.152, 0.305, 0.61, 1.22, 2.44, 4.88, 9.76, 19.5, 39.0, 78.1, 156.25, 312.5 и 625.0 Hz Inherent noise level of MN channel (Ku=8, FΔ=0÷10Hz) <1 µV Input voltage range of MN channel ±10 V Gain coefficient 1 and 8 ... ... Connection to PC interface USB External power supply source 10.5 ÷ 30 V Maximum power consumption 5(8) W Protection of electrical equipment IP66 Operating temperature -40 ÷ +70°С Dimensions 210x110x70 mm Weight of receiver <1.2 kg Weight of advanced ...

Electrical tomography set MEDUSA-SKAT+switchbox CommDD2

... temperature -40 ÷ +50 °С MEDUSA receiver: Input impedance > 60 MOhm Input voltage range ± 10 V Accuracy better than 1 % Operating temperature -40 ÷ +70 °С Dimensions 210 x 110 x 70 mm Weight (without batt.) < 1.2 kg CommDD2 switchbox: Current in AB line up to 2 A Maximum input voltage 400 V Operating temperatures -20 ÷ +50 °С CNumber of switching electrodes 48/64 (up to 256 on request) Connection to PC interface USB 2.0 Protection of electrical equipment IP-65 Overall dimensions 200x170x75 mm Weight of set 1.5 kg

FastSnap TEM/TDEM

... particular use wh ere the depth and electrical resistivity of layers are instrumental for interpretation. Plug-ins available for advanced functions such as accounting for IP effects and data collection using grounded lines. Delivery set of FastSnap equipment in single- / dual- channel version: Transmitter CTU-30 with rated current 30 А — 1 pc. Transmitter CTU-30 Cable for connecting external power supply 12 V Cable for connection of 110 / 220 V network GPS / GLONASS Antenna with SMA-M connector Control and synchronization cable (length 40 m) Power supply cable for the source ...

RТ-3S

RT-3S reels is designed for geophysical survey with different methods that require a lot of cable. It is also possible to leave the equipment plugged in while winding and unwinding the cable. This reel is ideal for logging using probes integrated with cable ( TELSS-VSP , GNOME). RT-3S compared to RT-2S has smaller overall dimensions and spaciousness of the coil. Frames are made of ...

Marine and freshwater sparkers

... surveys and VSP. Typically, sparkers are used in marine seismic acquisitions in seas and oceans, as salt water is a good current conductor. Salt Water Sparkers (SWS) of various configurations are available for this purposes. Fresh Water Sparkers (FWS) ... ... winches for HV cable and streamer with slip ring can be purchased to provide fast and safe deployment and recovery of UHR marine equipment during field operations. Geodevice offers a full range of modern acquisition equipment, suitable for high resolution ...

Multi-component downhole seismic array GStreamer

... similar to large VSP systems and does not depend on the relative depth of the modules and different hydrostatic pressure at different depths. GStreamer is significantly lighter and smaller comparing to electromechanical clamping systems that results in exceptional ... ... well both in dry and water-filled wells. The geophone array can be supplied on a reel with slip ring, which allows to leave the equipment plugged into it while winding and unwinding the cable. VSP and crosshole data processing requires efficient and sophisticated ...

ZondRes2D — 2.5D electrotomography for resistivity and IP

... for analyzing the quality of ERT data ensures the quick and efficient identification of problematic measurements in automatic and semi-automatic modes. ZondRes2d deploys a simple and comprehensible data format that allows one to easily combine different electrical survey systems, including various options for setting the topography (including the bathymetry data of off-shore ERT) and other auxiliary information. Output files of the most popular geoelectrical equipment (Syscal, ABEM, AGI, Siber-48, Siber-64, Omega-48, ARES, ARES-II, complex MARY Smart + CommDD2 (48/64/72/80) , complex SGD-EET MEDUSA + CommDD2 (48/64/72/80) are supported ZondRes2d has a wide range of tools for mathematical modeling and ...

ZondRes3D — 3D electrotomography for resistivity and IP

... significantly extends the range of electric prospecting solved problems due to sections investigating that are considerably different from «classic» horizontal-layered. Resolution and thus interpretation quality of electrical tomography is closely connected ... ... measurements efficiency has basic importance and in many aspects defines possibility of practical using of this method. Special equipment with programmed automatic switching of electrodes is applied for reaching of maximum effectiveness of field works. The ...

Geophysical surveys

... structure of body of ballast and subgrade of railways and roads, determining resistivity of soils and the presence of stray currents, searching for communications, determining the location of damaged areas, examining concrete structures, determining the ... ... manufacturing facilities and, as a consequence, a high level of technological infrastructure and the capability to adapt the produced equipment for a specific problem solution. Professional and experienced team members. You can find some examples of our studies ...
Main / Services 

Results of the year

News Eve is the best moment to sum up the results and revise what was done in 2018. At this year we took part in more than 10 conferences and exhibitions where we were demonstrating the equipment we design and manufacture and presenting studies on technologies we currently develop. On the “GeoEurasia 2018” conference it was demonstrated G-Boomer for the first time. At this event it was also introduced a prominent idea on the simultaneous source technique that allows one to improve efficiency of seismic survey ...
Main / About us / News 
Search results 1 - 15 of 15
First | Prev. | 1 | Next | Last