Search results

Horin is a software package designed for complex processing, visualization and analysis of geophysical and geological data obtained during land, air and marine surveys. The program works with magnetic, gravity and electrical survey data and supports a wide range ...

ZondST2D is designed for 2D interpretation of seismic tomography data on refracted and reflected waves (land, cross-borehole and water variants). ZondST2d is a part of Zond Software family of programs with unified interface and data processing sequence. It’s easy to start working in ZondST2d if you have experience of processing in any other Zond product. Compatibility of data formats inside Zond Software package helps ...

Oasis Montaj software platform (Geosoft) provides a standard for working with geophysical, geochemical, geological and GIS data. For more than 30 years, the platform has been constantly updated with new features that help professionals around the world store, exchange,...

We have scheduled new Tesseral Engineering seismic data modeling software webinars because many people from different time zones have asked us about it. We will be happy to see you at the webinar. Share this information with your colleagues, so that the have the chance to participate too. Australia and Asia time zone ...

... (including VES) it means that the studied object must be contrast in electric resistivity from host rocks. Comfortable interface and wide possibilities of data presentation allow to solve given geological problem with maximum effectiveness. While developing software special attention was payed to comfort and simplicity of its use, variety of visualization features and account of a priori data. Depending on the interpreter’s choice, software gives different variants of data interpretation algorithms. Comfortable ...

ZondMT1D software is designed for one- dimensional interpretation of magnetotelluric (MT) data in MT, AudioМТ and RadioMT frequencies ranges and also for soundings with controlled source. This group of electroprospecting methods is based on studying of the natural ...

ZondProtocol represents ready solution for electrical tomography, and solves wide range of problems from protocol creating and field data processing to quality control and preparation data for inversion. The software provides support for the following instruments: SYSCAL, ABEM, COMMDD, ERA-MULTIMAX, TOMOZOND, OMEGA-48. Convenient interface and variety of data visualization features allow to solve wide range of geological problems with maximum effectiveness....

... implementation of marine high resolution acquisition techniques resulted in increased requirements in data processing. Inadequate or weak processing flows often result in loosing potential advantages of HR/UHR surveys. RadExPro is a seismic processing software, which is fully capable for advanced processing of high resolution and ultra-high resolution marine seismic data. It has a full set of state-of-art algorithms from on board Real Time QC to 3D regularization and pre-stack migrations. RadExPro ...

ZondTEM2D software is designed for two- dimensional Transient ElectroMagnetic (TEM) and frequency sounding for several observation systems ground and airborne. Comfortable interface and wide possibilities of data presentation allow to solve given geological problem ...

ZondTEM1D software is designed for one- dimension multi-stations interpretation of Transient ElectroMagnetic (TEM) sounding for various observation systems (Line-Loop, Loop-Loop, Loop-Line, Line-Line). Comfortable interface and wide possibilities of data presentation ...

ZCGViewer software is designed for calculation and visualization of apparent resistivity graphs obtained with any electromagnetic profiling systems. The following measurement system: the loop-loop line-line, the line is a loop, the loop line. The software allows ...

ZondMT2D software is designed for two-dimensional interpretation of magnetotelluric (MT) data in MT, AudioМТ and RadioMT frequencies range. This group of electroprospecting methods is based on studying of the natural variable electromagnetic field, allows to ...

ZondGM2D new software for 2D gravity and magnetic survey combines the features of two predecessors ZondMag2D and ZondPGM. The program is designed for two-dimensional multiprofile interpretation of gravity and magnetic land / boreholes / aero data. ZondGM2D is a ready ...

... of problems from mathematical modeling and quality control to field data processing and interpretation. Convenient interface and variety of data visualization features allow to solve wide range of geological problems with maximum effectiveness. The software consists of two basic modules. One for the first times picking on the seismograms. The second is used for solving forward and inverse problems of seismic tomography. For the seismograms processing developed a special interface designed to simplify ...

Software ZondSP2d is designed for 2D interpretation of self-potential (SP) data. The SP method is based on studying electric fields that occur in rocks as a result of various physical and chemical processes. In almost any geological setting there are ...

The GeoTechControl software is designed for processing and interpreting data obtained by the seismoacoustic method of surveying building structures GeoTechControl allows: To process the data obtained by Sonic Integrity Testing for solving geotechnical problems determinations ...

ZondRes2d software is designed for 2D interpretation of electrical tomography data by resistivity and induced polarization (IP) methods during land, borehole, and offshore surveys. ZondRes2d solves a wide variety of tasks from mathematical modeling, observation ...

... data used. In ZondRes3D here is possibility of weights setting for measurements, fixing and limits making of changing features of different cells, using of a priori model as major in inversion. The robust schemas of noise estimation are realized in the software. There is also possibility to import and display results of measurements by other methods and cross-boreholes data that improve interpretation results. More details on the functionality of the software can be found by downloading the user manual ...

... priori model as reference in inversion. There is also possibility to import and display results of measurements by other methods and cross-boreholes data that improved quality of results. zondgm3d ZondGM3D - 3D Gravity and Magnetic Data Interpretation Software | Geodevice ZondGM3D - 3D Gravity and Magnetic Data Interpretation Software | Geodevice ZondGM3D - Logiciel d'interprétation 3D pour données gravimétriques et magnétiques | Geodevice ZondGM3D - Logiciel d'interprétation 3D pour données ...

... image. Fundamental and higher modes picking Resulting Vs section, estimated by MASW dispersion curves inversion. VSP, CST Engineering VSP surveys VSP and crosshole data processing requires efficient and sophisticated processing flow. RadExPro seismic software provides all necessary algorithms for multi-component data processing – hodogram analysis, 2C/3C component orientation, wavefield separation, velocity modelling, corridor stacking and well tie to reflection seismic data. High-resolution marine ...

... automatically-controlled telemetry system that ensures TEM/TDEM, frequency sounding, induced polarization and direct current techniques. The system is by far the most advanced in its class offering the highest technical specifications and most comprehensive software package along with an affordable cost. The software streamlines all aspects of advanced automated ground TEM survey. FastSnap allows advanced users to produce results at the highest professional level. The system is truly new benchmark for ground ...

... 2016.2 main window! 4:01 seismic processing RadExPro 5.07.2016 Amplitudes inversion in ZondST2D 2:05 inversion ST2D 29.06.2016 Joint inversion of MASW and refraction seismic data 2:00 MASW + seismic refraction method ST2D 29.04.2016 ZondST2D seismic software. Overview 2016 13:22 seismic processing ST2D 6.04.2016 Joint inversion of seismic and gravity data 1:32 seismic refraction method + gravity prospection GM2D 5.10.2015 Full 2D joint inversion of resistivity imaging and refraction seismic data ...

... environmental, archaeological, and defense-related surveys. Its modular design allows to easily deploy longitudinal and horizontal transverse gradiometers or single sensor magnetometer to suit specific survey needs. The system is complemented by intuitive software that facilitates equipment control, real-time data recording, and visualization, along with seamless data export for further analysis. MariMag’s adaptability, precision, and ease of use make it an invaluable tool for marine exploration, environmental ...

Electrical Resistivity Tomography (ERT) Video Min Discussed method Program Date Review of some importing possibility of Zond 2D softwares 4:14 ERT ZondRes2D 16.01.2022 Inversion of all res2dinv examples in one video 8:45 ERT ZondRes2D 15.01.2022 Basic topography options in ZondRes2D 2:53 ERT ZondRes2D 14.01.2022 Pre and Post filtering of ERT data in ZondRes2D 2:26 ERT ZondRes2D ...

... Date Exporting XY-slice to Google-earth kml file 0:39 modelling Zond 16.01.2022 Print preview dialogue review 2:37 modelling Zond 8.12.2021 Color scale and contours settings in Zond products 4:23 modelling Zond 01.12.2021 Axis settings dialogue in Zond software products 5:47 modelling Zond 29.11.2021 Creating and editing of borehole data in Zond software products 9:20 modelling Zond 29.11.2021 Incorporating of additional elements into interpretation results 5:11 modelling Zond 24.11.2021 New functions ...

... using echo-methods. In literature, this method is known as Pile Integrity Testing and is described in ASTM D5882-16. Delivery set: Acquisition unit All-in-One with charger and set of cables Hammer with accelerometer Accelerometer Transport case Software PIT Option: tablet computer 3) Kit CONTACT is designed for ultrasonic testing and tomography for measure of velocities of acoustic waves and detection of defects in bridge piers, walls, columns, statues, trees, rock samples, plastics, resins,...

... briefs, website content Assist in the preparation of brochures, reports, newsletters, and other material Computer and technology knowledge Google Docs MS Excel MS Outlook MS PowerPoint MS Windows MS Word Adobe Photoshop Project management software Social Media Desktop publishing software Quick Books Adobe Acrobat Reader Google Drive LinkedIn, Instagram, YouTube platforms management Canva Design If interested please send your resume to careers@geodevice.ca We appreciate your ...

... magnetic field in real time, in contrast to standard hydromagnetic survey with base station, where variation is taken into account only during post-processing of data from the field magnetometer and magnetic base station. Management and Data Acquisition Software The software sets the device configuration and measurement parameters, displays the values of the modulus or magnetic field gradient, controls the operation of the device during the survey and visualizes its spatial position in real time. The ...

... electrode switching using CommDD2. Optional GNSS receiver When surveying with a towed streamer, it is crucial to record coordinates in real time using GNSS receivers. We supply sealed GNSS receivers that can be located on the vessel and on the end buoy. Software ALMAZ Marine is Windows laptop-controlled Easy measurement mode setup Real time collected data visualization Saving raw and / or processed data for subsequent inversion Reliability and warranty Our R&D specialists have extensive experience in ...

Video Min Discussed method Date Graphics setting up in zond products 4:32 МТ 2.12.2021 ZondMT2D's MT-editor for MT sounding data postprocessing 10:47 МТ 20.05.2020 New possibilities of ZondMT2D software 5:48 МТ 13.06.2019 New tips for ZondMT2D 0:26 МТ 31.10.2018 Magnetotelluric 2d stable inversion algorithm 3:19 МТ 18.10.2018 Noisy data inversion in ZondMT2D 2:36 MT 16.10.2016 2D magnetotelluric inversion for large scale problem 2:53 ...

... PDA via USB and Bluetooth interfaces PIMV supports miniSD cards (up to 32 GB), is equipped with a GLONASS / GPS module, that fixes the geographic coordinates of measurement point, and allows recording voice comments to each measurement. The PIMVdata software, supplied with the device, is used to transfer data from the device to a PC via Bluetooth. When connected via USB interface, the device is recognized as an external flash drive and does not require additional software. Data is exported in Excel ...

... (impact method), special high-frequency sensors GTSensor are connected to the seismograph. On foundation slabs, it is more convenient to use 4-channel LandStreamer towed seismic sensors as a receiver. The data can be processed in the GeoTechControl software. Monitoring of microseisms, earthquakes, explosions, hydraulic fracturing and any other events The seismograph allows continuous long-term data recording to built-in and external data storage devices with hot swapping capability without data ...

Video Min Discussed method Date Review of some importing possibility of Zond 2D softwares 4:14 ERT 16.01.2022 Inversion of all res2dinv examples in one video 8:45 ERT 15.01.2022 Basic topography options in ZondRes2D 2:53 ERT 14.01.2022 Pre and Post filtering of ERT data in ZondRes2D 2:26 ERT 14.01.2022 Batch processing of data files ...

... magnetic field in real time, in contrast to standard hydromagnetic survey with base station, where variation is taken into account only during post-processing of data from the field magnetometer and magnetic base station. Management and Data Acquisition Software The software sets the device configuration and measurement parameters, displays the values of the modulus or magnetic field gradient, controls the operation of the device during the survey and visualizes its spatial position in real time. Also,...

... refraction data Vp and Vs in ZondST2D 1:21 seismic refraction method 17.07.2016 Amplitudes inversion in ZondST2D 2:05 inversion 29.06.2016 Joint inversion of MASW and refraction seismic data 2:00 MASW + seismic refraction method 29.04.2016 ZondST2D seismic software. Overview 2016 13:22 seismic processing 6.04.2016 Inversion of first break amplitudes in ZondST2D 3:05 inversion 6.11.2014 ZondST2D overview of features. Part II. 7:14 forward modeling 11.10.2014 New features of ZondST2d picker 2:15 10.10.2014 ...

... broadcasting realized via CAN FD or RS-232 connection. With the optional CAN-Ethernet interface unit SmartMag can be connected directly to network. The digital CAN FD cable can be up to several kilometers long. The device is supplied with the SmartManager software that has all the necessary functionality to perform measurements in the INTERMAGNET network of magnetic observatories. Magnetometer parts The magnetometer package contains on the one hand a minimum number of unified parts to ease assembly and ...

Video Min Discussed method Date Review of basic model section's functions in Zond 1D products 5:55 VES 31.01.2022 ZondIP1d software 8:37 VES 28.07.2015 Addition of new VES soundings to ZondIP1d project 1:30 VES 5.05.2014

... and lightweight reel made of durable plastic. Real-time measurements are transmitted via Wi-Fi to Andriod device. The other recording option is a compact interface module that provides power to the probe and data transfer via USB to a PC. The Solclino software is used to obtain data, numerical and graphical depicting, saving, reading previously recorded files and generating a report. The body of the INCLIS 30 probe is made of AISI 316L steel and has an outer diameter of 30 mm. The light weight of ...

... stand-alone mode without a network connection or connected computers. The data are recorded on the built-in memory of GPS-synchronized seismographs and can be downloaded after the work is completed. CSP seismograms are created later using the Harvest software. DAQlink with two directional Wi-Fi antennas Work with vibrators or pulse sources. Nodal shooting. Standard version with top panel connectors The side placement of the connectors is convenient for linking the seismographs into a single array....

... accuracy with base or rover modes Application area: Base station for ground, drone, and airborne magnetic surveys Volcanology and earthquake prediction Operation with QuantumMag as a part of gradiometer for any type of ground magnetic surveys SmartManager software features Magnetic field measurement mode control Visualization and quality control of measured data Visualization of the calculated measurement sensitivity Saving daily data files Capabilities of the CAN-Ethernet interface unit: Real-time data ...

... Gradiometer accessories Non-magnetic cart for multi-sensor gradiometer Non-magnetic tripod External GNSS antenna on rod Additional LiFePo4 battery CAN-Ethernet interface unit for connecting to PC/router RS-232 cable for connecting to PC SmartManager software Power supply 100-240 VAC Magnetometry survey forward modelling and data inversion may be successfully performed with advanced ZondGM2d and ZondGM3d software packages. QuantumMag Type Optical pumped Cs magnetometer Number of sensors up ...

... broadcasting via CAN FD or RS-232 connection. Optional CAN-Ethernet interface unit can be connected directly to the standard network equipment. The digital CAN FD line can be up to several kilometers long. The device is supplied with the SmartManager software which has all the necessary functionality to work in the INTERMAGNET network of magnetic observatories. Magnetometer parts and backpack harness MaxiMag sensors are available in two modifications: Modular Rigid Sensor vertical orientation + - ...

... winding/rewinding speed is transmitted via radio channel from the cable counter sensor to the radio module connected to a tablet or PC. Displaying of the received information and changing of the meter settings is carried out with the help of pre-installed software. To conserve battery power, the cable meter turns on automatically when the pulley rotates and automatically turns off one minute after the rotation stops. Area of application: Marine Magnetic Survey Side-scan sonar (SSS) Seismoacoustic profiling ...

... (up to 3 shots/second) and ultra-high frequency (up to 6kHz) seismic section. Array includes following equipment: Energy source: MultiJack -500HP1.5 Source: FWS 125 or G-Boomer Streamer: single channel HR-Streamer Recorder: Sigma-4 seismograph Software: RadExPro Real-Time Setup is ideally suited for surveys on lakes, rivers and in shallow marine environments, among typical applications are: bedrock mapping for engineering purposes (e.g. piers, bridges, terminals) geology mapping for object ...

... tips wearing, reduces maintenance work and allows significantly speed up acquisition process. Array includes following equipment: Energy source: MultiJack -5000HP6.0 Source: SWS-500 Streamer: single channel HR-Streamer Recorder: Sigma-4 seismograph Software: RadExPro Real-Time GEODEVICE has developed a unique single-channel streamer design, which can be used for a wide range of water depths. The key feature is 4 mounted hydrophone groups of various lengths, registering signal independently. At ...

... specifications. Array includes following equipment: Energy source: MultiJack -5000 Source: SWS 500 Streamer: 48 channel streamer Group separation: 3.125/2/1 Recorder: Sigma-4 seismograph Winch: Automatic deck winches for power HV cable and streamer Software: RadExPro Real-Time Typical array applications are: Geohazards assessment (shallow gas, faults, man-made features) Boulder detection for renewable installation Detailed stratigraphy studies Regional oceanographic studies Key features: Applicable ...

... -25000HP12.0 Source: SWS-2500 Streamer: 24/48 channels streamer with 6.25 m group separation; depth controllers; 3C compasses; INS sensors; front and tail buoys Recorder: Sigma-4 seismograph Winch: Automatic deck winches for power cables and streamers Software: RadExPro Real-Time Oceanography Studies Setup - Advanced Solutions for Marine Surveys | Geodevice Oceanography Studies Setup - Advanced Solutions for Marine Surveys | Geodevice Configuration pour Études Océanographiques - Solutions Avancées ...

... operate and maintenance In addition to HRStreamer the following items can be purchased: High-frequency seismic station Deck winch Towed buoys with positioning system Paravan for 3D system Towed sparkers and boomers with MultiJack energy sources Software for quality control and data processing Lake, G-Boomer HF source, MultiJack -500HP1.5 energy source, HRStreamer: Lake, FWS-250 source, MultiJack -2500HP3.0 energy source, HRStreamer: Lake, FWS-125 source, MultiJack -500HP1.5 energy source,...

... collected by GStreamer with receiver depths from 22 to 70 meters. Common receiver gather with non-oriented X and Y components. Shots with opposite polarity are overlaid on each trace. Orientation of horizontal components (Uy, Ux) using RadExPro seismic software. The hodogram on the left represents particle motion trajectory of the earth of two horizontal components for the selected part of the first breaks. Unrotated traces in acquisition coordinates (Y’, X’) and rotated traces (Y’, X’) in radial-transverse ...

... performing descent lifting operations, towing and storage of streamers. In addition to HRStreamer the following may be purchased: Towed buoys with positioning system Paravane for diverting the streamer from the wake or creating a 3D observation system Software for quality control and data processing To select the right configuration of the streamer or to draw up a technical specification for the purchase / rental of a complete equipment set for performing the survey, contact us in any way specified ...